Phillips Head Metal/Rubber Crokinole Adaptor Kit (8 Screws + 10in Rubber)

Phillips Head Metal/Rubber Crokinole Adaptor Kit (8 Screws + 12in Rubber)

Crokinole Screw size: #12 x 1" Screws.  See video below for how this all works!  And HERE is a thread on BGG discussing the pros/cons of rubber vs. wooden pegs.

Instructions: Carefully cut 8 uniform ¾ inch lengths of tubing and push then onto the screws. Next, remove the wooden posts and screw in the metal posts with attached tubing about ¼ - ½ inch until tubing is flush with playing surface.  Screws are slightly larger than the holes to allow for a nice grip yet not damage the holes should wood peg reinstallation be desired.  Do not rest anything on the screws as undue stress can damage the existing holes.  For permanent wood peg installation simply use a small amount of wood glue.

Note these are only certified to work with Mayday Crokinole boards, our 8 peg holes are a #20 size hole and these screws MAY be too large for other brands.

Elite (2024 and beyond) Board Installation

Note if you are using this for our ELITE boards or other boards with smaller holes we recommend drilling your holes out to the proper size using a 1/4 inch drill bit!

The pegs for the standard boards are much thicker so you need to modify the holes in your ELITE board, but that should further reduce the impact and imperfect look of the splitting around the holes.  You can see exactly what this entails in this video below: